|
BACKING LAMINATE
The decorative laminate,
which is produced according to the EN-438, is
used to balance out the decorative surface
behind the carrier board, which is the hidden
surface, on the horizontal and the vertical
surfaces. Its thickness is between 0,4 – 0,9 mm.
It is produced as one of its surface sanded.
TECHNICAL CHARACTERISTICS OF THE PRODUCT
PRODUCTION INFORMATION
The dimension and the surface
forms of undercoat laminate are as below table
according to our production capability.
a* is the dimension of the width in the CPL
production as 1.300mm maximum and 650 mm
minimum.
B* is the dimension of the length in the CPL
production as 5.500mm maximum and 1.500 mm
minimum. |
