GLOSS SURFACE WRITING BOARD LAMINATE

The decorative laminate, which is produced according to EN 438, is adhered on the carrier board on the horizontal and the vertical surfaces. It can be written on the board with the writing board pens ( marker board). It can easily be cleaned with dry textile or felt cleaners. Its thickness is between 0,6 mm and 1,0 mm.

TECHNICAL CHARACTERISTICS OF THE PRODUCT

PRODUCTION INFORMATION

The dimension and the surface forms are as stated on the below table according to our capability of production of the gloss writing board. Additionally, the gloss writing board is produced in white colour. When requested, it can be produced in light grey colour with the size of 1.300x3.660mm.



SUGGESTION FOR USE

• Its surface should be cleaned with cloth or with felt.
• There should not be any stain or foreign material on the cloth or on the felt which can damage the writing board.
• Since the surface of the writing board is opaque, any abrasive cleaning agent should not be used on the surface.
• The staining which can occur on the surface of the board due to wrong use of pen or material can be cleaned with water.
• After cleaning the board with water, it should be dried well and any humidity should be relieved. Otherwise, the chalk can stain the surface when writing.