FLOORING LAMINATE

It is produced according to the EN 438 and it is produced as the decorative surfaces being resistant to abrasion. The laminates are used at the raised floor applications after the required applications have been completed. The decorative surface of the laminate is impregnated with specially prepared melamine resin. It is pressed in a special way. The flooring laminate is not allergenic and it does not contain toxic materials. The other characteristics of the flooring laminate is as follows in addition to its non abrasive characteristic of its surface:
•It is antistatic.
•It is highly resistant to abrasion.
•It is highly resistant to scratching.
•Its impact resistance is high.
•The resistance of its surface against warming and getting humid is very high.
•It is resistant to static loads.
•Its resistance against chemicals is very high.
•It can easily be cleaned with organic and household cleaning agents.
•It is easy to clean.
•Its dimensional stability is very good.
•It is resistant to cigarette char and to high temperatures.
•It is resistant to burning and it has fire retardant characteristic.

APPLICATION FIELDS

The use of flooring laminate has increased with the developments in the technology and the increased office life today. The electrical cables of the computers and the similar equipments, which are used more with the developments in the technology, required the cables to be placed in pipes in offices and they are passed under the floors, which otherwise would not have looked nice in the office. Therefore, the pipes and the cables are laid under the raised flooring and hence the look of the office becomes better and their maintenance is easy and without causing any damage to the office floor. The resistance of the flooring to abrasion and its decorative look is the plus points for the laminate.
1 mm thickness laminates are adhered to special density chip boards, which are 25mm or 30 mm thick, with special adhesives and adhesion techniques. A laminate or galvanised sheet or aluminium sheet is adhered to the back surface in order to balance it.

TECHNICAL CHARACTERISTICS OF THE PRODUCT